A Looping Curve That Never Stops Moving
This stainless steel spiral sculpture looks like one wide steel band caught in mid-turn. A tall loop rises from the ground, curls over itself and sweeps back down into a broad, flat tail. A smaller coil winds around the base, so your eye keeps travelling along the curve and never finds a place to rest. Because the band changes direction so often, the piece looks different from every side you walk around.

Smooth Curves Shaped by Skilled Hands
Every curve of this stainless steel spiral sculpture starts as a flat steel sheet, and the shape only stands up because our team builds it in a careful order. We first roll the wide bands into open loops, then fix thin steel rods between them to hold each curve at the exact angle of the design. The rods work like a temporary skeleton, so the loops cannot sag or twist while the joints are still open.
Because the loops are open and thin, our welders climb inside each one and join the seams from the inside. This keeps the weld marks off the outer face, so the mirror surface needs no patching later. It is slow work in a tight space, but it lets the outside stay as smooth as a single sheet of metal. After welding, we remove the rods, grind every joint flush and polish the steel in stages until it reflects the workers around it.


Built for Years of Outdoor Display
We make every stainless steel spiral sculpture from 304 or 316 stainless steel. If your project sits near the coast or in a humid climate, we recommend 316 for its stronger resistance to salt and moisture.
The mirror surface resists rust and wipes clean with water and a soft cloth. An inner steel frame keeps the slim loops stable in strong wind, and we can adjust the size, the number of loops or the finish to match your site. Colors such as gold, blue or black are also available if you want a bolder look.

Protective Wooden Crate Packaging
We protect each abstract metal sculpture before it leaves our workshop. First, we wrap the polished surface in soft film and thick felt to prevent scratches. Then we build a custom wooden crate around the sculpture and brace it with extra slats, so the loops cannot shift during transport. We load the crate carefully and ship it by sea or air, and we send you photos of the packing before dispatch so you can check everything yourself.

Contact Mily for a factory-direct quote, custom dimensions and shipping details.